Product Overview
Brand: SICWOOD
Features:
- Precise Size: SICWOOD slab flattening router bit with 1/2 Inch shank, 2" Cutting Diameter, Carbide Inserts: 12*12*1.5 mm, 6-Wing, The Max RPM 18,000, the universal Inserts provide on asin "B0CZ8WLD4C "
- 6-Wing Cutting Smoother: This CNC spoilboard surfacing router bit uses solid carbid blade, high hardness, sharpness of blade, smoother cutting, Great for flattening wood.
- Important Safety Note: This 2" (6-wing) flattening bit operates at high RPM and requires precise setup. Check all six carbide inserts for flatness and tightness before use—small deviations (1/32") may cause imbalance and vibration. Test-run below 10,000 RPM first, then increase gradually. Never exceed 18,000 RPM. Use a router with at least 2 HP for safe operation. ensure both safety and a quality slab surface.
- Efficient & Economical: This flattening router bit with replaceable 4-sided carbide Inserts 1.5mm thickness, more Durable and Sharp than other carbide blade, longer life, it is a cost-effective solution.
- Cutting Material: Used on planing and rabbeting the following materials: MDF/Plywood /Chipboard /Plastic /Acrylic / Fiberboard/Balsa/HDU Board /HDF/LDF / Epoxy (Epoxy Resins) / Hardwood/Softwood
- FOR Equipment: Use on router sled for flattening slabs, and other CNC machine. Make sure that your router sled rails are fully stable and squared, Make sure the screws are tight
