Product Overview
Brand: Sonzrod
Features:
- SWITCH BODY MARKINGS - Each R19A switch is rated 6A at 250V AC and uses a maintained SPST ON-OFF circuit with 2 blade terminals. The black actuator is non-illuminated and displays white I and O symbols for clear switch-position reference
- MATCHED DEVICE CONTROL USE - Intended for select appliances, electrical equipment, and panel-mounted control applications that use the same R19A rating, 2-pin arrangement, switch function, terminal dimensions, body size, and installation opening. Confirm every device before replacement
- READY REPLACEMENT PACK - Includes 3 matching rocker switches for multiple verified devices, routine equipment maintenance, or one immediate replacement with additional switches kept ready. All three pieces use the same R19A 6A 250V AC 2-pin SPST configuration
- VERIFY TERMINAL LAYOUT - Compare the original switch with the two 4.75 x 0.8 mm blade-terminal references, non-illuminated rocker, maintained ON-OFF action, and snap-in clips. Lighted, 3-pin, 10A, or 125V switches may look similar but are not confirmed as interchangeable
- PANEL OPENING REFERENCE - Approximate bezel size is 20.8 x 14.8 mm. The recommended cutout is about 12.9-13.1 mm high and 19.2-19.6 mm wide depending on panel thickness. Measure the opening before ordering because a small dimensional difference can prevent proper mounting
Details: R19A Three-Piece Rocker Switch Set This listing includes 3 matching black R19A rocker switches. Each switch provides maintained ON-OFF operation through a 2-terminal SPST circuit and installs into a correctly sized panel opening using integrated snap-in retaining clips. Compatibility Designed for select small appliances, electrical devices, equipment housings, and control panels that require the same R19A model reference, 6A 250V AC rating, two-terminal arrangement, SPST circuit, non-illuminated actuator, and mounting dimensions. Verify each device separately before installation. Common Applications May be used as an ON-OFF power control in matching appliance and equipment circuits. The three-piece set can support multiple verified devices, workshop maintenance, or one replacement with additional matching switches kept available for future service. Interchange Reference R19A is provided only as a model and specification reference. Do not substitute another switch solely because it is described as a 15 x 21 mm rocker switch. Lighted versions, 3-pin versions, and switches rated 10A or 125V may use different internal wiring and are not confirmed replacements for this product. Technical Details Product Type: Rocker Switch Model Reference: R19A Function: Maintained ON-OFF Circuit Type: SPST Terminal Count: 2 Blade Terminals Electrical Rating: 6A at 250V AC Installation Type: Snap-In Panel Mount Indicator Light: No Actuator Color: Black Housing Color: Black Terminal Size Reference: Approximately 4.75 x 0.8 mm Bezel Size: Approximately 20.8 x 14.8 mm Panel Cutout Height: Approximately 12.9-13.1 mm Panel Cutout Width: Approximately 19.2-19.6 mm depending on panel thickness Supported Panel Thickness Reference: Approximately 0.7-3.0 mm Temperature Classification Reference: T85 Degree of Protection: IP20 Electrical Life Reference: More than 10,000 cycles Mechanical Life Reference: More than 30,000 cycles Package Quantity: 3 Switches Please Verify Before Ordering Compare the original switch with the R19A marking, 6A 250V AC rating, two blade terminals, SPST circuit, non-lighted rocker, terminal size, panel cutout, body dimensions, retaining clips, and maintained ON-OFF operation. Measure every panel opening when the switches will be used in different devices. Disconnect equipment from the electrical supply before replacement and follow the original wiring diagram. A correctly matched replacement may help only when the original rocker switch is the cause of the problem. It will not correct damaged cables, loose connectors, failed motors, power supplies, circuit boards, fuses, or other internal faults. Quick Match Summary Three matching R19A black rocker switches, each rated 6A at 250V AC with two blade terminals, an SPST maintained ON-OFF circuit, no indicator light, and snap-in panel mounting. Verify the original rating, function, terminals, and panel dimensions before purchase.
