Product Overview
Brand: HQHAOTWU
Features:
- 【Accurate Measurement】 This water level sensor can achieve precise measurement, with stable and reliable pressure testing, durability, and strong anti-interference ability
- 【Long Service Life】The shell of the submersible level transducer adopts a high-strength protective type, with stainless steel joints for impact resistance and damping, making it stable and suitable for harsh conditions on site
- 【Fine Workmanship】 There are protective rings at the front and rear seals to resist the entry of moisture from the outside, thereby protecting the internal circuit and improving product durability
- 【Overload Capacity】Do the test to make sure the ability of overload resistance and shock resistance, precisely ensure the overload capacity. This submersible level transducer is with 10m cable. And the liquid level sensor is both accurate and secure
- 【Note】Shell and power should be connected with earth; don't change the welded parts and connected. To avoid being submerged, please add waterproof box in the outdoors and don’t block the vent. Please read the manual carefully before operation
Details: Submersible Level Transducer 10m Cable Level Transmitter Level Sensor Technical Parameters: Measurement Range: 0-10mH2O/100kPa Cable Length: We will offer 10 meters in order to make sure the enough length Measurement Medium: Water Power Supply: 24-32VDC Output Signal: 4-20mA Accuracy: ±0.5%FS Overload Capacity: Two times full-scale pressure Using Temperature: 0c—70℃ Compensation Temperature Range: 0c—60℃ ZTC: (typical): ±0.02%FS/℃ STC: (typical): ±0.02%FS/℃ Long-term Stability (typical): ±0.1%FS/year Waterproof Class: IP68 Load Resistance: less than (U-10)/0.02Ω Shell Material: 316L stainless steel Notice: 1.Prevent from the surge voltage, over-voltage, over-current and the protection of reversed polarity. 2.Do the test to make sure the ability of overload resistance and shock resistance, precisely ensure the overload capacity. 3. Implement the electromagnetic interference resistance to avoid the problem taken place under the condition of complicated electromagnetism environment. Caution: 1.The measurement medium should be compatible with stainless steel. 2.Don't connect the wires when the power is on,connect the power after checking the connection wires. 3.Shell and power should be connected with earth; don't change the welded parts and connected wires of the outgoing products when customer use it. 4.Sensor is related to the precision device, don't disassemble, and what's more, don't touch the diaphragm, in case of break. 5.To avoid being submerged, please add waterproof box in the outdoors and don’t block the vent. 6.You can pull the line into a semi-circular and make the vent down. What in the package(300187) : 1pc Submersible Water Level Transducer Sensor with 10m Cable 1pc User's manual
