Product Overview
The load wheels of the pallet car transmit power from the engine to the ground to propel the vehicle forward.The drive wheel connects to the drive axle, and power is transferred through the transmission axle to the drive wheel.Ground friction on the drive wheel acts forward, providing the driving force that enables movement and. Part Name: Load Wheel Fitment: Compatible with Crown WP 3000 Pallet Jack Features: Transmission Efficiency: The drive wheel is manufactured using mechanical processes to precise fit between wheel and shaft, supporting efficient power transmission. Bearing Capacity: Designed to support operational loads typical of industrial pallet jack use. Corrosion Resistance: treatment provides resistance to rust in humid or mildly corrosive environments. Package Includes: 2x Load Wheels Installation Instructions: 1.Prepare tools: wrench, jack, and screwdriver. 2.Use the jack to lift the vehicle and secure it on a stable support. 3.Remove the retaining nut from the old wheel using a wrench, then remove the old wheel. 4.Disconnect any chain or gear attached to the drive wheel using a screwdriver or wrench. 5.Position the wheel onto the axle, aligning it so the threaded side faces the nut.Hand-thread the nut onto the axle. 6.Tighten the nut with a wrench to secure the wheel. 7.If applicable, reinstall the chain or gear onto the drive wheel and secure with the appropriate tool. 8.Lower the vehicle to the ground and recheck nut tightness with a wrench. Compatibility: This part is compatible with Crown WP 3000 Pallet Jack.Verify fitment using the OE number referenced in the product listing.Before purchase, confirm compatibility by comparing the OEM part number and illustrations to your.
- Model Compatibility: Fits Crown pallet jack model WP 3000 as a direct replacement for the AP03 2X load wheel assembly.
- Part Designation: Identical to the AP03 2X Load Wheel Assembly referenced in the specification.
- Functional Purpose: Restores wheel assembly function for load handling on the Crown WP 3000 pallet jack.
- Specification Match: Matches the 2X load rating and wheel configuration of the AP03 assembly used on the WP 3000.
- Installation Scope: Designed for installation in the same location and orientation as the AP03 2X Load Wheel Assembly.
